51�������

Abstract:

Metal‐halide perovskites (MHP) are highly promising semiconductors for light‐emitting and photovoltaic applications. The colloidal synthesis of nanocrystals (NCs) is an effective approach for obtaining nearly defect‐free MHP that can be processed into inks for low‐cost, high‐performance device fabrication. However, disentangling the effects of surface ligands, morphology, and boundaries on charge‐carrier transport in thin films fabricated with these high‐quality NCs is inherently difficult. To overcome this fundamental challenge, terahertz (THz) spectroscopy is employed to optically probe the photoconductivity of CsPbBr3 NC films. The vibrational and optoelectronic properties of the NCs are compared with those of the corresponding bulk polycrystalline perovskite and significant deviations are found. Charge‐carrier mobilities and recombination rates are demonstrated to vary significantly with the NC size. Such dependences derive from the localized nature of charge carriers within NCs, with local mobilities dominating over interparticle transport. It is further shown that the colloidally synthesized NCs have distinct vibrational properties with respect to the bulk perovskite, exhibiting blue‐shifted optical phonon modes with enhanced THz absorption strength that also manifest as strong modulations in the THz photoconductivity spectra. Such fundamental insights into NC versus bulk properties will guide the optimization of nanocrystalline perovskite thin films for optoelectronic applications.

Abstract:

AbstractControlling the transport and minimizing charge carrier trapping at interfaces is crucial for the performance of various optoelectronic devices. Here, how electronic properties of stable, abundant, and easy‐to‐synthesized carbon dots (CDs) are controlled via the surface chemistry through a chosen ratio of their precursors citric acid and ethylenediamine are demonstrated. This allows to adjust the work function of indium tin oxide (ITO) films over the broad range of 1.57 eV, through deposition of thin CD layers. CD modifiers with abundant amine groups reduce the ITO work function from 4.64 to 3.42 eV, while those with abundant carboxyl groups increase it to 4.99 eV. Using CDs to modify interfaces between metal oxide (SnO2 and ZnO) films and active layers of solar cells and light‐emitting diodes (LEDs) allows to significantly improve their performance. Power conversion efficiency of CH3NH3PbI3 perovskite solar cells increases from 17.3% to 19.5%; the external quantum efficiency of CsPbI3 perovskite quantum dot LEDs increases from 4.8% to 10.3%; and that of CdSe/ZnS quantum dot LEDs increases from 8.1% to 21.9%. As CD films are easily fabricated in air by solution processing, the approach paves the way to a simplified manufacturing of large‐area and low‐cost optoelectronic devices.

Abstract:

Understanding and controlling grain growth in metal halide perovskite polycrystalline thin films is an important step in improving the performance of perovskite solar cells. We demonstrate accurate control of crystallite size in CH3NH3PbI3 thin films by regulating substrate temperature during vacuum co-deposition of inorganic (PbI2) and organic (CH3NH3I) precursors. Films co-deposited onto a cold (−2 °C) substrate exhibited large, micrometer-sized crystal grains, while films that formed at room temperature (23 °C) only produced grains of 100 nm extent. We isolated the effects of substrate temperature on crystal growth by developing a new method to control sublimation of the organic precursor, and CH3NH3PbI3 solar cells deposited in this way yielded a power conversion efficiency of up to 18.2%. Furthermore, we found substrate temperature directly affects the adsorption rate of CH3NH3I, thus impacting crystal formation and hence solar cell device performance via changes to the conversion rate of PbI2 to CH3NH3PbI3 and stoichiometry. These findings offer new routes to developing efficient solar cells through reproducible control of crystal morphology and composition.