51ÁÔÆæÈë¿Ú

Abstract:

The StaFF (stabilisation of final focus) system will use interferometers to monitor the relative positions and orientations of several key components in the beam-delivery and interaction region. Monitoring the relative positions of the ILC final focus quadrupole magnets will be the most demanding application, where mutual and beam-relative stability will have a direct impact on machine luminosity. Established, laser-based frequency scanning interferometry (FSI) and fixed-frequency interferometry (FFI) offer positional resolution at length scales of the laser wavelength (1500 nm to 1560 nm) and a thousandth of the wavelength, respectively. As part of the ATF at KEK, StaFF will use interferometers to measure lines of a geodetic network to record relative motion between two beam position monitors. Interferometers are being designed and tested in Oxford prior to deployment at the ATF.

Abstract:

The ATF extraction line laser-wire (LW) aims to achieve a micron-scale laser spot size and to verify that micron-scale beam profile measurements can be performed at the International Linear Collider beam delivery system. Recent upgrades to the LW system are presented together with recent results including the first use of the LW as a beam diagnostic tool.

Abstract:

A new laser-wire (LW) system has been installed at the ATF extraction line at KEK, Tsukuba. The system aims at a micron-scale laser spot size and employs a mode-locked laser system. The purpose-built interaction chamber, light delivery optics, and lens systems are described, and the first results are presented.

Abstract:

The ILC requires an unprecedented accuracy and speed for the survey and alignment of its components. The Rapid Tunnel Reference Surveyor (RTRS) is a self-propelled train intended to automatically survey a reference network in the ILC tunnels with a design accuracy of 200 microns over distances of 600 m. A prototype RTRS has been built by the LiCAS collaboration. It will shortly commence operation at DESY. The operation principle of the RTRS will be explained. The status of the project's hardware, software and calibrations as well as the principles and performance of the underlying measurement techniques will be described.