51�������

Abstract:

The field of solution-processed photovoltaic cells is currently in its second spring. The dye-sensitized solar cell is a widely studied and longstanding candidate for future energy generation. Recently, inorganic absorber-based devices have reached new record efficiencies, with the benefits of all-solid-state devices. In this rapidly changing environment, this review sheds light on recent developments in all-solid-state solar cells in terms of electrode architecture, alternative sensitizers, and hole-transporting materials. These concepts are of general applicability to many next-generation device platforms. The field of solution-processed photovoltaic cells is currently in its second spring, with solid-state devices incorporating novel inorganic absorbers reaching record efficiencies. This review sheds light on recent developments in all-solid-state solar cells in terms of electrode architecture, alternative sensitizers, and hole-transporting materials: concepts applicable to many next-generation device platforms. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Abstract:

Already exhibiting solar to electrical power conversion efficiencies of over 17%, organic-inorganic lead halide perovskite solar cells are one of the most promising emerging contenders in the drive to provide a cheap and clean source of energy. One concern however, is the potential toxicology issue of lead, a key component in the archetypical material. The most likely substitute is tin, which like lead, is also a group 14 metal. While organic-inorganic tin halide perovskites have shown good semiconducting behaviour, the instability of tin in its 2+ oxidation state has thus far proved to be an overwhelming challenge. Here, we report the first completely lead-free, CH3NH 3SnI3 perovskite solar cell processed on a mesoporous TiO2 scaffold, reaching efficiencies of over 6% under 1 sun illumination. Remarkably, we achieve open circuit voltages over 0.88 V from a material which has a 1.23 eV band gap.

Abstract:

Perovskite solar cells have rapidly risen to the forefront of emerging photovoltaic technologies, exhibiting rapidly rising efficiencies. This is likely to continue to rise, but in the development of these solar cells there are unusual characteristics that have arisen, specifically an anomalous hysteresis in the current-voltage curves. We identify this phenomenon and show some examples of factors that make the hysteresis more or less extreme. We also demonstrate stabilized power output under working conditions and suggest that this is a useful parameter to present, alongside the current-voltage scan derived power conversion efficiency. We hypothesize three possible origins of the effect and discuss its implications on device efficiency and future research directions. Understanding and resolving the hysteresis is essential for further progress and is likely to lead to a further step improvement in performance.

Abstract:

Mesoporous single crystals (MSCs) of TiO2 are promising materials for more efficient dye sensitized solar cells and other energy conversion or storage devices, since they combine high surface area with large crystalline domain size. In this work, we investigate the charge transport properties of TiO2 MSCs after annealing them within a confining template at temperatures from 500 to 850 C. We observe that higher anneal temperatures do not change the crystal phase, as in nanocrystalline TiO 2, but do influence the MSC absorption spectrum in a manner consistent with the signature of increased oxygen-vacancy defects. By comparing MSC film conductivity in vacuum and in air, we infer that these anneal-induced defects increase the background charge density in TiO2. Subsequently, we measure higher effective mobility in annealed MSCs using transient mobility spectroscopy (TMS), consistent with higher anneal temperatures filling sub-bandgap trap states by n-doping TiO2. Finally, we measure faster charge transport rates in solid-state dye sensitized solar cells as well as increased open-circuit voltages at low light intensity with increasing MSC anneal temperature. This study leverages the fixed geometry and crystal phase of MSCs under thermal treatment to identify and isolate the doping effect of annealing at high temperature, previously inaccessible for mesoporous anatase TiO2. The results offer insight into the influence of doping on charge transport in TiO2-based solar cells and the tunability of MSCs for use in enhancing device performance. © 2013 American Chemical Society.